Oki C911 Maintenance Manual page 80

Oki Data CONFIDENTIAL
LCD Status Message Online
Inspection
lamp
indicator
( represents a blank line.)
Varies On
File System
Operation failed
<nnn>
Press OK Button
Varies Varies Indicates that an integrity check in
Invalid Secure Data
Press OK Button
Varies Varies Invalid data was received. This
Invalid Data
Press OK Button
45530603TH Rev.2
Details
Indicates that a file system error, other
than any of the above-described file
system related status errors, has occurred.
Processing that does not use the file
system is operable.
%FS_ERR%
=0..... GENERAL ERROR
=1..... VOLUME NOT AVAILABLE
=3..... FILE NOT FOUND
=4......NO FREE FILE DESCRIPTORS
=5..... INVALID NUMBER OF BYTES
=6..... FILE ALREADY EXISTS
=7..... ILLEGAL NAME
=8..... CANT DEL ROOT-
=9..... NOT FILE
=10... NOT DIRECTORY
=11... NOT SAME VOLUME
=12... READ ONLY
=13... ROOT DIR FULL
=14... DIR NOT EMPTY
=15... BAD DISK
=16... NO LABL
=17... INVALID PARAMETER
=18... NO CONTIG SPACE
=19... CANTCHANGE ROOT
=20... FD OBSOLETE
=21... DELETED
=22... NO BLOCK DEVICE
=23... BAD SEEK
=24... INTERNAL ERROR
=25... WRITE ONLY
authentication printing found data
corruption of the job, so the job has
been deleted.
message urges users to press the OK
button and clear the warning message.
This is displayed when unsupported
PDL command is received or a spool
command is received without HDD.
Remedial
LCD Status Message Online
measure indicator
( represents a blank line.)
Replace Varies Varies Indicates that writing of a job account
the HDD.
Accounting Log
Writing Error
Press OK Button
Varies Varies
IPv4 Address is
conflicted
Change IPv4
Address
Press the
OK button.
Press the
OK button.
4. TROUBLESHOOTING PROCEDURE
Inspection
Details
lamp
log has failed due to a disk access
error during writing of the log (related to
logging).
This status remains displayed until the
OK button is pressed.
Indicates that the IPv4 address is the
identical with that of another device.
Remedial
measure
Press the
OK button.
Change
the IPv4
address.
4-35