Connecting The Twisted-Pair Cable To The Adapter - DEC Personal DECstation 5000 User Manual

Ethernet
5.5 Connecting to a Twisted-Pair Network
5. Find the twisted-pair cable. It has a telephone-jack type of connector.
6. Position the connector on the cable so the clip is on the bottom. Then push
the connector into the empty connector on the adapter until you feel the
connector click into place.
Figure 5–16 Connecting the Twisted-Pair Cable to the Adapter
To ThickWire Ethernet
connector on system unit
WSMXS087
.
7. Do not attach the other end of the twisted-pair cable at this time. See
the next section for instructions on finding your Ethernet station address.
Report this address to your system manager, who will complete the
connection to the network.
5–16 Ethernet
ThickWire-to-
twisted-pair adapter
Hold the telephone-jack
type of connector so the
clip is on the bottom.