Internal Storage Devices
9.5 Installing a Hard Disk Drive
9.5.1.2 RZ24 Hard Disk Drive
The SCSI jumpers are on the underside of the RZ24 drive. Position the blocks
as shown in Figure 9–8 to set the SCSI ID. The ID should be 2 unless you have
another device with SCSI 2 already attached to the SCSI connector at the back
of the system unit.
Figure 9–8 SCSI ID Jumper Settings for the RZ24 Hard Disk Drive
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID pins
WSMXS059
.
9–10 Internal Storage Devices
SCSI ID 3
SCSI ID 4
SCSI ID 5
SCSI ID 6
SCSI connector
Power supply connector