Finding Your Ethernet Address - DEC Personal DECstation 5000 User Manual

5.6 Finding Your Ethernet Address

To complete the connection to the network, you'll need to find your Ethernet
station address.
1. If the workstation software is running, shut it down. Type shutdown -h
now and press Return.
2. When you see the prompt (>>), type cnfg and press Return.
You'll see a display something like this on your screen:
3:KN02-CA DEC T1.2a TCF0 (16 MB)
3. Look at the leftmost column in the display and find the line that begins
with . The entries that follow the
3:
base system.
4. Once you've found the
find the entry that begins with
The letters and numbers that follow
address for your base system. The address begins with
remaining characters, indicated in the example by x's, will be unique to
your workstation.
5. Give your Ethernet station address to your system manager, who will
complete the network installation.
If you must complete the installation yourself, follow the instructions in
the networking guide for your workstation software.
5.6 Finding Your Ethernet Address
(CX -- d=8)
(Sb: devs = 0)
(FDI: 1)
(enet: 08-00-2b-xx-xx-xx)
(SCSI = 7)
describe the configuration of your
3:
, look at the rightmost column in the display and
3:
.
enet:
are the Ethernet station
enet:
Ethernet
; the
08-00-2b
Ethernet 5–17