Ethernet
5.5 Connecting to a Twisted-Pair Network
4. Find the ThickWire Ethernet cable. Note that one end of the cable has a
sliding lock on it and the other does not.
5. Find the end of the cable that doesn't have the sliding lock. Position it so
its widest part is on top.
Figure 5–12 ThickWire Ethernet Cable
Sliding lock on
Thickwire Ethernet connector
WSMXS019
.
6. Push the cable connector all the way into the ThickWire connector on the
system unit.
7. Lock the sliding lock on the system unit connector.
5–12 Ethernet