Rz25 Hard Disk Drive - DEC Personal DECstation 5000 User Manual

9.5.1.3 RZ25 Hard Disk Drive

The RZ25 drive has two sets of pins, one on the side of the drive and one at the
front.
The drive ships with a jumper on pin 4 on the front of the drive. This
jumper does not affect the SCSI ID number of the drive and must
not be removed. If the jumper is removed, the drive will not function
correctly.
The SCSI ID is factory-set at 2. If you need to change the setting, you can use
either set of pins. To set the ID, do the following:
• If you use the pins on the side of the drive, remove all jumpers from the
pins on the front of the drive except for the jumper located on pin 4.
Internal Storage Devices
9.5 Installing a Hard Disk Drive
Note
Internal Storage Devices 9–11