To Install The Hard Disk Drive; Hard Disk Drive And Mounting Bracket - DEC Personal DECstation 5000 User Manual

Internal Storage Devices
9.5 Installing a Hard Disk Drive
To set the SCSI ID on other disk drives, refer to the manual that comes with
the drive.
Once you have verified or changed the SCSI ID, you can install the drive in the
system unit.

9.5.2 To Install the Hard Disk Drive

1. If the workstation software is running, shut it down: Type shutdown -h
now and press Return.
2. Turn off the workstation by pressing the 0 on the on/off switch on the back
of the system unit.
3. Open the system unit. (See Section 1.1.3.1 .)
4. The hard disk drive comes in a metal mounting bracket. Hold the drive so
the bracket is on the bottom.
Figure 9–11 Hard Disk Drive and Mounting Bracket
WSMXS050
.
5. Connect the SCSI cable to the drive.
6. Connect one of the short ends of the internal drive power cable to the
drive.
9–14 Internal Storage Devices
Power
connector
SCSI
connector