Setting Hypoglycaemic Warning Alarms; Setting Hyperglycaemic Warning Alarms - AgaMatrix WaveSense JAZZ Owner's Manual

15
Setting Hypoglycaemic
Warning Alarms
The Hypoglycaemic Warning Alarm alerts you when your glucose
test results are below the hypoglycaemic threshold you have set.
The meter is pre-set to a hypoglycaemic threshold of 3.9 mmol/L.
Always consult your healthcare professional for your recommend-
ed target ranges. When your glucose test results are below your
set hypoglycaemic threshold, the meter display will flash your
test results, the abbreviation "HYPO," time, and date repeatedly.
WARNING: Your healthcare professional should recommend
what your hypoglycaemic limit is.
[1] When your meter is deactivated, press the TICK ( ) button
once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the abbreviation "HYPO" is displayed.
[3] Press the TICK ( ) button to enter and edit
the Hypoglycaemic Warning Alarm settings.
[4] Set the Hypoglycaemic Alarm ON or OFF
with the DOWN ( ) or UP ( ) arrow buttons.
Your selection will be highlighted by the blink-
ing of the symbol. Press the TICK ( ) button
to confirm your selection and move on to the
hypoglycaemic threshold setting.
[5] Set the hypoglycaemic threshold (flashing)
with the DOWN ( ) or UP ( ) arrow buttons. Press the TICK
( ) button to confirm your selection and return to the menu.
46
8100-02301 Rev G Artwork, Guide, Owners, mmol/L, AgaMatrix, WaveSense Jazz SEC, UK
16
Setting Hyperglycaemic
Warning Alarms
The Hyperglycaemic Warning Alarm alerts you when your glucose
test results are above the hyperglycaemic threshold you have set.
The meter is pre-set to a hyperglycaemic threshold of 13.3 mmol/L.
Always consult your healthcare professional for your recommend-
ed target ranges. When your glucose test results are above your
set hyperglycaemic threshold, the meter display will flash your
test results, the abbreviation "HYPr," time, and date repeatedly.
WARNING: Your healthcare professional should recommend
what your hyperglycaemic limit is.
[1] When your meter is deactivated, press the TICK ( ) button
once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the abbreviation "HYPER" is displayed.
[3] Press the TICK ( ) button to enter and edit
the Hyperglycaemic Warning Alarm settings.
[4] Set the Hyperglycaemic Alarm ON or OFF
with the DOWN ( ) or UP ( ) arrow buttons.
Your selection will be highlighted by the
blinking of the symbol. Press the TICK ( )
button to confirm your selection and move
on to the hyperglycaemic threshold setting.
[5] Set the hyperglycaemic threshold (flashing)
with the DOWN ( ) or UP ( ) arrow buttons. Press the TICK
( ) button to confirm your selection and return to the menu.
47