Preparing For A Test With Your Agamatrix Wavesense Jazz Meter - AgaMatrix WaveSense JAZZ Owner's Manual

TICK ( ) button again to see your most recent test result.
[2] Press the DOWN ( ) or UP ( ) arrow buttons repeatedly
to scroll thru every test result, starting from the most recent
and ending with the oldest.
HOW TO ACTIVATE THE METER AND VIEW MEALTIME
AVERAGES
[1] When your meter is deactivated, press the TICK ( ) button
once to enter Menu mode. The word "MEM" is displayed.
Press the DOWN ( ) or UP ( ) arrow buttons until the word
"MEAL" appears in the lower part of the display. Press the TICK
( ) button again to see your mealtime averages.
[2] Press the DOWN ( ) or UP ( ) arrow buttons repeatedly
to scroll through your Breakfast, Lunch, Dinner, and Bedtime
Averages.
HOW TO DEACTIVATE THE METER
To deactivate the meter, press and hold the TICK ( ) for 2
seconds. If the meter is inactive for 3 minutes, the meter will
be deactivated automatically.
HOW TO ACCELERATE THROUGH OPTIONS
Hold down the DOWN ( ) or UP ( ) arrow buttons to accel-
erate through options or results.
16
8100-02301 Rev G Artwork, Guide, Owners, mmol/L, AgaMatrix, WaveSense Jazz SEC, UK
6
Preparing For a Test With Your
AgaMatrix WaveSense JAZZ Meter
[1] Insert an AgaMatrix WaveSense
JAZZ Test Strip: Insert a new AgaMatrix
WaveSense JAZZ Test Strip into the meter.
Make sure you insert the test strip, with
the contact bars facing up, into the test
strip port. The meter will be activated
automatically.
Note: If you do not start the test within 5
minutes, the meter will be deactivated. To
reactivate your meter, press the TICK ( )
button or remove the unused AgaMatrix
WaveSense JAZZ Test Strip and reinsert it into
the meter.
[2] Meter Ready for Test: The meter now displays the
blood drop symbol and the word "Fill". The AgaMatrix
WaveSense JAZZ System is now ready for you to apply
control solution or blood.
17