AgaMatrix WaveSense JAZZ Owner's Manual page 8

About the AgaMatrix WaveSense JAZZ Meter Display Symbols/
Messages
(4) Dead Battery Message: Appears when
battery #2 in your meter is dead.
(5) Temperature Symbol: Appears when the
meter is outside its operating temperature range
of 10 °C to 40 °C (50 °F to 104 °F).
(6) Ketone Symbol: Appears when your glucose
test results are higher than 13.3 mmol/L.
(7) Control Solution message: Appears after
you have performed a control solution test.
(8) Units of Measurement symbol: Results will
be displayed in mmol/L.
12
(1) Date and Time:
Appears here.
(2) Glucose Test Results:
(3) Low Battery Message:
Appears when battery
#2 in your meter is
running low.
8100-02301 Rev G Artwork, Guide, Owners, mmol/L, AgaMatrix, WaveSense Jazz SEC, UK
(9) Apply Sample to Test Strip message: The
flashing droplet symbol and the word "fill" will
signal you to apply a sample to the test strip.
(10) Volume Message: Can be set to ON or OFF.
(11) 1 Month, 2 Week, 3 Day Indicators:
The appropriate number of days will appear
when viewing graphical averages.
(12) 1,2,3 Countdown: The 1, 2 and 3
symbols will appear during a glucose test.
(13) Graphing Area: Areas of the dot
matrix will appear during a test and when
displaying graphs.
(14) Happy Face Symbol: The happy face is
displayed with glucose test results that fall within
specific pre and post meal target ranges.
(15) Mealtime Tags: The mealtime tags appear
after a test is complete and will help categorize
your results.
(16) /Day, SD, and AVG Symbols: These symbols
appear in the meter's data management functions.
13