AgaMatrix WaveSense JAZZ Owner's Manual page 31

excessive urination, or blurry vision, follow your healthcare
professional's recommendations. If you get a Hi glucose test
result but have no symptoms of high blood glucose, then retest
with a new AgaMatrix WaveSense JAZZ Test Strip. If you still get
a Hi glucose test result, follow your healthcare professional's
recommendations. Checking ketones may be advisable.
HYPOGLYCAEMIC WARNING ALARM: Flashing
message with the time. Test result flashes, with
double beep (if volume is ON).
MEANING: If the Hypoglycaemic Warning Alarm is set, your
glucose test result is lower than the pre-set threshold.
HYPERGLYCAEMIC WARNING ALARM: Flashing
message with the time. Test result flashes, with
double beep (if volume is ON).
MEANING: If the Hyperglycaemic Warning Alarm is set, your
glucose test result is higher than the pre-set threshold.
KETONE MESSAGE: Flashing message, with double
beep (if volume is ON).
MEANING: The result of the glucose test is higher than 13.3
mmol/L. ACTIONS: You should check ketones. Follow your
healthcare professional's recommendations.
TEMPERATURE MESSAGE: Flashing message, with
double beep (if volume is ON).
58
8100-02301 Rev G Artwork, Guide, Owners, mmol/L, AgaMatrix, WaveSense Jazz SEC, UK
MEANING: The test has been performed outside the operat-
ing temperature range. ACTIONS: Move to an area with an
ambient temperature of 10 °C to 40 °C (50 °F to 104 °F). Wait
for the meter and test strips to reach the new temperature
(usually 10-20 minutes) and retest.
LOW BATTERY MESSAGE: Flashing message
MEANING: Battery #2 in your meter is low. ACTIONS: If the
low battery symbol appears, battery #2 must be replaced.
Battery numbers are indicated by the numbers printed on the
pull tabs.
DEAD BATTERY MESSAGE: Flashing message
MEANING: Battery #2 in your meter is dead. ACTIONS: If
the dead battery symbol appears, the dead battery must be
replaced.
LOW BACKLIGHT BATTERY: Backlight flashes when user
presses the BACKLIGHT ( ) button.
MEANING: Battery #1, which powers the backlight, is low.
ACTIONS: If the backlight flashes when user presses the
BACKLIGHT ( ) button, battery #1 must be replaced. If the
backlight does not turn on, battery #1 is dead and must be
replaced. (Battery numbers are indicated by the numbers
printed on the pull tabs).
59