Panel Removal - Follett 12CI425A-LI Operation And Service Manual

Panel removal

Fig. 10
Top cover: Lift cover up and off Velcro strips.
Fig. 12
Splash panel: Remove 4 screws. Pull out bottom
of panel to allow top to slide out from under hopper
support lip.
10
Fig. 11
Front cover: Pull bottom of cover, then lift cover up
and forward to unhook from keyhole slots.
Fig. 13
Side panels: Remove screw located on lower rear
side. Pull side panel toward front of unit and out of
back panel. Note: Before removing right hand side,
remove side louver panel by lifting up and pulling
forward on panel.
12CI425A • 12HI425A