Keiser M3I Installation And Operation Manual page 13

M3i INDOOR GROUP CYCLE
SETTING TRIP UNITS TO MILES OR KILOMETERS (KM) AND BIKE ID NUMBER
(Unless otherwise specified or requested at the time of purchase, the M3i trip distance is set to miles.)
NOTE: STEPS 1 THROUGH 7 MUST BE COMPLETED WITHIN 1 MINUTE
1
Begin with the bike off, push shift lever
all the way down
4
1X
TIME ROW
Pedal 1 full revolution. Notice the 2
in the "TIME ROW".
7
Move the shift lever from stop to
stop 6 times.
2
1X
TIME ROW
Pedal 1 full revolution. The bike id
(bid) in the screen above is 0, yours
may be different. Also, notice the 1
in the "TIME ROW".
5
Set shift lever to gear 19 for Miles, or
set shift lever to gear 21 for Kilometers.
8
bike id number (bid)
USA = the trip units
were successfully set
to Miles
EURO = the trip units
were successfully set
to Kilometers
Confirm the correct units have been
set.
3
Set shift lever to gear 21 for Miles, or
set shift lever to gear 19 for Kilometers.
6
1X
TIME ROW
Pedal 1 full revolution. Notice the 3
in the "TIME ROW".
Gear 8 to 16
9
holds bid number
number
Gear 1 to 7
decreases bid
number
Once the trip units have been set, you
have the opportunity to adjust the
bike id number. Adjust the shift lever
to attain the desired bike id number,
then set the shift lever to any number
between gear 8 and 16.
NOTE: The computer will only shut
down while the shift lever is be-
tween gears 8 and 16.
Gear 17 to 24
increases bid
p13.