Remarks On Control Pwb Replacement - Kyocera ECOSYS M2030dn/PN Service Manual

1-6-2 Remarks on control PWB replacement

When replacing the control PWB, remove the EEPROM (U17) from the control PWB that has been removed
and then reattach it to the new control PWB.
Detaching of EEPROM
1. The flat screwdriver is inserted between
EEPROM and socket.
2. Detach it little by little right and left and
alternately while noting the
transformation and the damage of the
pin.
U17
EEPROM
Figure 1-6-3
EEPROM
Socket
Figure 1-6-4
1-6-3
2PK/2PL/2PM/2PN
EEPROM
Control PWB
Flat screw driver