Public Notice For Canadian Customers; Care And Cleaning - Evenflo Embrace 35 Owner's Manual

Public Notice for Canadian Customers

• Child restraints could be recalled for safety reasons.
You must register this restraint to be reached in a
public notice. Send your name, address, the re-
straint's model number, and manufacturing date to
Evenflo Company, Inc.
1801 Commerce Dr.
Piqua, OH 45356
or call 1-937-773-3971 or register on-line at
www.evenflo.com/registercarseatcanada
• For public notice information, call Transport Canada
at 1-800-333-0510 or go to www.tc.gc.ca
Motor Vehicle/Aircraft Usage
When used with the internal harness and
properly installed pursuant to these instructions,
this restraint is certified for use only in
passenger and multi-purpose passenger
motor vehicles, buses, and trucks
equipped with Type I or II seat
belts and in aircraft.
Airplane installation is the same
as Type I vehicle installation.
Refer to pages 50 to 56 for instructions on installing your
child restraint in aircraft.

Care and Cleaning

• To clean pad, slide the elastic loops/plastic clips
of the seat pad off of the seat shell. Remove the
harness system. See "Changing the Harness
Position" on page 36 to ensure proper reinstallation
of harness straps.
• Machine wash cloth pad, body pillow, head support
and boot (available on some models) separately in
cold water, delicate cycle, and tumble dry 10 – 15
minutes, low heat.
• Wipe straps, buckles, canopy, and harness adjuster
with warm damp cloth and mild soap. Air dry.
• To help protect the vehicle upholstery, place a
towel beneath and behind the child restraint.
T T ! !
IP IP
Check with
your airline before
departure to make sure
this restraint meets
their requirements.
10
Storing Your Instructions
After thoroughly reading and following
these instructions, store them in the
carrier behind the seat pad, as shown.
For future reference, record the model number of your
child restraint AND the date of manufacture below.
Model Number:
Date of Manufacture:
11