Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Evenflo Snugli
Summary of Contents for Evenflo Snugli
- Page 1 25700776 3/12...
-
Page 2: Table Of Contents
Care and Cleaning ............10 Storing Your Instructions ..........11 Visual Glossary ..............12 • IMPORTANT INFORMATION • Using the Snugli Handle ..........16 Proper Installation WITH the Convenience Base This child restraint is designed for use ONLY in the Installation Checklist ............ 19... -
Page 3: Symbol Legend
• DO NOT attach additional padding, toys or other infants, as well as other resources for parents and devices not made by Evenflo, or described in these medical professionals, at instructions, to the child restraint. Items not tested http://www.aap.org/healthtopics/carseatsafety.cfm with the child restraint could injure the child. -
Page 4: Warnings
If the child restraint cannot be properly installed, use this child restraint. Consult vehicle owner’s manual, try a different seating location or call Evenflo at 1-800-233-5921. Vehicle Seat Belt Warnings • DO NOT use this child restraint in a vehicle seating position with door-mounted seat belts. - Page 5 • DO NOT use the Snugli Infant Car Seat with any location. other base other than the one supplied. • Failure to adjust the harness snugly around your •...
-
Page 6: Safe Practices
“stand” position (p. 16) when using this child a recall. Send your name, address, the restraint’s restraint in a vehicle. model number, and manufacturing date to • When using the restraint in the “stand” position Evenflo Company, Inc. (p. 16), ONLY use on level ground and NEVER 1801 Commerce Dr. -
Page 7: Care And Cleaning
• To help protect the vehicle upholstery, place a towel beneath and behind the child restraint. Proper Disposal of this Child Restraint At the end of this child restraint’s useful life, Evenflo encourages you to dispose of it properly. Most of the components in this child restraint are recyclable. -
Page 8: Visual Glossary
Belt Back Seat Retractor Lap/Shoulder Belt LATCH Anchors Seat Crease Front Seat Retractor Snugli Convenience Base Locking Clip LATCH Harness Angle Indicator mporTanT mporTanT Consult your vehicle owner’s manual to determine proper placement of child restraint in your vehicle and familiarize yourself with your vehicle’s... -
Page 9: Front/Back View
Visual Glossary Visual Glossary Front View Back View Canopy Carrier Release Handle Handle Harness Slots Harness Slots Chest Clip Instruction Handle Handle Storage Area Release Release Seat Pad (behind seat pad) Buckle Harness Release Straps Harness Harness Straps Release Carrier Button Harness Convenience Base... -
Page 10: Using The Snugli Handle
Using the Snugli Handle Using the Snugli Handle To change handle positions, squeeze both red IMPORTANT: Always secure the child in the carrier. handle releases and rotate the handle to the desired Refer to “Securing your Child in the Carrier” on page 33. -
Page 11: Installation Checklist
1 inch (25 mm) from side-to-side or from To make installation easier, watch the installation front-to-back at the LATCH harness/vehicle video of this child restraint at www.evenflo.com. belt path. T he base is level with only green (no red) showing in the level indicator window (pp. -
Page 12: Installing The Convenience Base With The Latch System
WARNING Installing the Convenience Base with the LATCH System • The carrier MUST be locked firmly into the base. Check by lifting up on the carrier. LATCH is a system for attaching the child restraint • NEVER use this child restraint in the forward-facing system to your vehicle seat. - Page 13 Installing the Convenience Base with the Vehicle Seat Belt WARNING • The carrier MUST be locked firmly into the con- venience base. Check by lifting up on the carrier. Refer to your owner’s manual to locate the lower • NEVER use this child restraint in the forward-facing anchors on your vehicle seat.
-
Page 14: The Vehicle Seat Belt
Secure the base to your vehicle seat by routing the vehicle seat belt through the openings on the sides of the base. IMPORTANT: You MUST use a locking clip with lap/shoulder seat belt combinations that have a buckle WARNING tongue that slides freely along the belt without locking into place. -
Page 15: Releasing The Carrier From The Base
Releasing the Carrier from the Base The level indicator must be completely green If you have fully adjusted the convenience base and the level indicator is still not level, use a tightly rolled towel or small blanket beneath the front edge of Move the handle to the “carry”... -
Page 16: Proper Installation Without The Convenience Base
4. Check your work. To properly protect your child, the carrier MUST NOT move more than 1 inch (25 mm) from side-to-side or from front-to-back at To make installation easier, watch the installation the vehicle belt path. video of this child restraint at www.evenflo.com. -
Page 17: Installing The Carrier Without The Convenience Base
Installing the Carrier without the LAP AND Convenience Base LAP BELT SHOULDER BELT Route ONLY the lap portion of the vehicle seat belt through the belt slots on the carrier. In vehicles with a lap and shoulder belt , DO NOT route the shoulder belt through the belt slots. -
Page 18: Securing The Child In The Carrier
Securing the Child in the Carrier Place the baby into the carrier. Baby’s bottom and back should be flat against the seat. If there is a gap, baby will not be comfortable. If the level line is not parallel to the vehicle floor, use a tightly rolled towel or small blanket beneath Slide each harness... -
Page 19: Removing The Child From The Carrier
Removing the Child from the Carrier Press the red buckle release , and remove the buckle tongues. The harness straps must be snug against the child. A snug strap should not allow any slack. It lies in Align the two sides of the a relatively straight line chest clip and snap... -
Page 20: Changing The Harness Position
Changing the Harness Position As your child grows, you will need to change the harness Insert both harness strap position so they are routed through the slots straps into the new closest to the child’s shoulders. The shoulder harness harness position slots. straps should ALWAYS be as close as possible to, but... -
Page 21: Changing The Crotch Strap Position
Changing the Crotch Strap Position As your child grows, you will need to change the crotch Loosen the harness strap position so that it is in the slot closest to your child. straps (p. 34) and move The crotch strap should ALWAYS be as close as possible the strap out of the to, but NEVER under, the child’s bottom. -
Page 22: Removing The Latch System
Using the Locking Clip Removing the LATCH System To watch a video about installing a locking clip, go to Press the adjuster release www.evenflo.com. button to loosen harness Use the locking clip with: strap. • Lap/shoulder seat belt combinations that have a... -
Page 23: Using As An Infant Carrier
Using as an Infant Carrier Secure the child in the carrier by following “Securing the Child in the Carrier” on page 33. Hold the lap/shoulder belts together just behind the free sliding buckle tongue and unfasten the seat belt. Lock Indicator While holding the belts and buckle tongue... -
Page 24: Installing The Canopy
WARNING Installing the Canopy NEVER • place this carrier near the edges of counter tops, tables, or other high surfaces. The child’s move- ments can cause the carrier to slide and fall. • NEVER leave the child in this carrier when the harness straps are loose or undone. -
Page 25: Replacement Parts
(found on the back of be, at Evenflo’s option, to repair or replace any Product the child restraint). that is determined to be defective by Evenflo and deter- mined to be covered by this warranty. - Page 27 After thoroughly reading and following these instructions, store them in the carrier behind the seat pad, as shown. • www.evenflo.com • USA: 1-800-233-5921 8 AM – 5 PM E.T. • México: 01-800-706-12-00 © 2012 Evenflo Company, Inc.