Cycling Through The Led Display Modes - BIG ASS FANS powerfoil x2.0 Installation Manual

42

Cycling through the LED display modes

To cycle through the possible display options on the wall controller, press the MODE button repeatedly. Below are
MODE
the possible screens in the order in which they appear on the display. Note: To access the MODE button, the controller
cover must be removed.
F
H
U
RUN STOP FWD REV REMLOC
FAN SPEED %
(start-up screen)
F
H
D
U
MODE
RUN
FAN ACTUAL FREQ.
Toggling the fan's command source
To select the fan's command source, press the LOCAL/REM button. The fan controller is preprogrammed to accept
LOCAL
digital and analog inputs from customer automation systems for start/stop and speed commands, or to be directly
REM
controlled from the wall controller. Upon startup, the fan puts priority on external commands provided by automation
systems or other fans. Note: To access all buttons on the controller, the controller cover must be removed.
To operate the fan from the wall controller, press the LOCAL/REM button to make sure that the LOC indicator is illuminated. The
RUN, STOP, and FWD/REV buttons are functional only when the LOC indicator is illuminated. Note: To access the LOCAL/REM button
on the controller, the controller cover must be removed.
EXTERNAL AUTOMATION
8'–24' POWERFOIL X2.0 WASHDOWN & POWERFOIL
®
Controller Operation (cont.)
F
H
MODE
U
RUN STOP
FAN MOTOR CURRENT
STOP FWD REV REMLOC
F
H
U
RUN STOP FWD REV REMLOC
"Rem" is illuminated
CONTROL ENABLED
WWW.BIGASSFANS.COM
X2.0 PLUS WASHDOWN
®
MODE
FWD REV REMLOC
F
H
U
MODE
RUN STOP FWD
FAN FREQ. COMMAND
F
LOCAL
H
REM
U
RUN STOP FWD
"LOC" is illuminated
WALL CONTROL
COMMANDS ENABLED
©2012 DELTA T CORP. ALL RIGHTS RESERVED
F
H
U
RUN STOP FWD REV REMLOC
KEYPAD LOCK
REV REMLOC
LOCAL
REM
REV REMLOC
MODE