Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 25 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel
7.7 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See
Section 7.9.2 on page 104
Figure 40 Network Setting > Wireless > Others
The following table describes the labels in this screen.
Table 26 Network Setting > Wireless > Others
LABEL
RTS/CTS
Threshold
Fragmentation
Threshold
Chapter 7 Wireless
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
Enter a value between 0 and 2347.
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
VMG1312-Bx0D User's Guide
100
Advertisement
Table of Contents
