Installing The Cpu Heat Sink - Cybernet iONE-GX31 Series User Manual

Installing the CPU Heat Sink

Cybernet iONE-GX31
1. Put on the heat sink and make sure that the four screws fit the
corresponding screw holes on the mainboard.
2. Alternate pressure while securing the four screws with
balance.
Note: Do not fix any screws until the four screws are in their
positions.
3. Secure the two screws at the opposite end near the top
edge of the bezel.
4. Connect the power cable to CPU Fan on the mainboard
labeled FAN 1 CUP FAN.
Page 20
System Assembly