Installing The Cpu Heat Sink - Cybernet i-One Series H5 User Manual

CYBERNET LCD-PC i-One Series H5

Installing the CPU Heat Sink

Page 16
1. Put on the heat sink and make sure that the
six screws fit the corresponding holes on the
mainboard.
2. Alternate pressure while securing the
screws with balance.
Note: Do not fix any screws until all six screws
are in their positions.
3. Secure the two screws at the opposite end
near the top edge of the bezel.
4. Connect the power cable to CPU Fan on the
Mainboard labeled CPU FAN 1.
System Assembly