Installing The Memory Module Ddr2 Sodimm - Cybernet iONE-GX31 Series User Manual

Installing the Memory Module DDR2 SODIMM

Cybernet iONE-GX31
1. The memory module has only one notch and will
only fit in the slot one way.
2. Insert the memory module into the DIMM slot at a
45° angle. Then push it in until the golden finger on
the memory module is deeply inserted in the DIMM
slot.
3. Press the memory module down and the metal
clip at each side of the DIMM slot will automatically
close.
4. Repeat the steps to install another memory
module to meet your needs.
Page 21
System Assembly