Installing the Optical Disk Drive
Cybernet iONE-GX31
1. Remove back bezel as indicated in
iONE DISASSEMBLY. Remove the
Optical Disk Drive frame as indicated in
INSTALLING THE HARD DISK DRIVE.
Insert the ODD interface board into the
ODD.
Note: Do not touch the pinheader to
avoid damaging.
2. Secure the two screws on the ODD interface board.
3. Put the ODD on the ODD frame and line up the four
screw holes accordingly.
4. Secure the four screws on the ODD frame.
Page 23
System Assembly