Installing The Irda Module (Optional) - Cybernet iONE-GX31 Series User Manual

Installing the IrDA Module (Optional)

Cybernet iONE-GX31
1. Remove the two screws securing the
FP board. Put on the IrDA module and
line up the two screw holes accordingly.
2. Press down the snap rivet (black).
3. Secure the two screws to fix the IrDA module
to the FP board.
4. Connect the cable IR to J1 on the FP board
and connect the audio cable from J2 on the FP
board to J7 on the Mainboard to complete the
installation.
Page 26
System Assembly