Download  Print this page

Advertisement

2
Right click mouse
Double
click
3
button
4
Dragging the mouse

4.2 Powering On

Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the
DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.
The video output mode of DVR 's the default setting is multi picture channel mode after starting the DVR , if the
time of start the DVR
is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording
function, the corresponding channel's recording pilot lamp will be light, the DVR is normal operation.
Button
Right click mouse, popping the shortcut menu, as follows;
Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen
(16
road
broadcast control switch view show or hide broadcast control bar.
To run the ActiveX Control ActiveX special operation, For example, double click
left
the certain item of record listed file, then the system will playback the segment
record video.
Depress the left key and dragging the mouse, banding select Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
Dragging playback Progress Bar back and forth to dolly moves, to achieve the
playback position adjustment. Dragging the audio and video regulation
parameter bar dolly moves, to achieve the parameter adjustment.
Description
playback),
twenty
four
Button
20
picture,thirty
two
picture,
Description

Advertisement

   Also See for Honeywell CADVR-1004-WD-M

   Related Manuals for Honeywell CADVR-1004-WD-M

Comments to this Manuals

Symbols: 0
Latest comments: