Network Setup - Honeywell CADVR-1004-WD-M User Manual

Hide thumbs Also See for CADVR-1004-WD-M:
Table of Contents

Advertisement

5.3 Network Setup

(1)General Setup
【DHCP】 After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS
server, etc
【UPnP】Can choose according to the requirement
【IP Address】Network logic address can according to the requirements set
【Subnet Mask】Server subnet mask
【Default Gateway】Server gateway
【DNS Server】DNS server addresses
【Server Port】Data port, initial socket for 7777
【HTTP Port】the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new
socket. If use IP address to 82, from the original browsing http://192.168.0.19, change for http://192.168.0.19:82.
【Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight
(2)Dial-UP Setup
32

Advertisement

Table of Contents
loading

Table of Contents