Honeywell CADVR-1004-WD-M User Manual page 40

【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The
user has the largest number of eight, user name may not be repeated.
【System Privileges】According to the requirements set of functions need checked
【Add User】 Input need to add user, and input the account password and passwords. According to save button to add
user.
【Delete User】Select the users need to delete, and click on the "yes" button to remove users
【Edit User】 Choose need to modify user, and in user permissions bar needed under the function of check. According
to the save button modified users.
【Edit Password】Select the account, input to modify current user password, and enter the account password and
confirmation password new. According to the save button for password changing. The password can be set to 0 ~ 8
bits
(4)Alarm Setup
【Alarm Input】Choose corresponding alarm channel, "all" setup all channel said.
【Input Type】Alarm input to often open/closed type choice (voltage output style)
【Clear Alarm】Stop the current alarm video and alarm output, but not removal, can again trigger alarm.
【PTZ Relate】When will the linkage happened alarm PTZ control
【Trigger Recording】When will trigger happened alarm selected channel video.
【Alarm Output】When will the linkage happened alarm corresponding alarm output
(5)Output Management
39