Table of Contents
Advertisement
Programming of "yaw"
1.
Now.move.the.yaw.lever.to.the.left.to.full.deflection.and.hold.it.there.for.at.least.one.second..
2.
The.RC.EYE.650.thus.recognises.the.YAW.channel.and.memorises this.
3.
Move.the.YAW.lever.back.to.neutral.position.with.the.THROTTLE.still.on.zero.
4.
As.confirmation,.the.red.LED.(LD2).on.the.combined.flight.control.board.will.flash,.three.times.in.a.cycle.
Programming of "nick"
1.
Move.the.Nick.lever.to.full.deflection.for.GIVE.Nick.upwards.and.hold.it.there.for.at.least.one.second..
2.
The.RC.EYE.650.thus.recognises.the.Nick.channel.and.memorises.this..Move.the.Nick.lever.back.to.neutral.position;.continue.to.leave
the THROTTLE on zero.
3.
As.confirmation,.the.red.LED.(LD2).on.the.combined.flight.control.board.will.flash,.four.times.in.a.cycle.
Programming of "roll"
1.
Move.the.ROLL.lever.to.full.deflection.for.ROLL.LEFT.and.hold.it.there.for.at.least.one.second..
2.
The RC EYE.650.thus.recognises.the.ROLL.channel.and.memorises.this..Move.the.ROLL.lever.back.to.neutral.position,.continue.to.
leave the THROTTLE on zero.
3.
As.confirmation,.the.red.LED.(LD2).on.the.combined.flight.control.board.will.flash,.five.times.in.a.cycle.
P. 26
Advertisement
Table of Contents
