Table of Contents
Advertisement
Assembly of the stabilizer
1.
Turn.the.RC.EYE.650.to.the.upright.position.again.
2.
Gently.open.the.plastic.buckle.on.the.bottom.body.frame,.raise.the.aluminium.profile.and.fasten.it.with.the.plastic.buckle.
Do not apply excess force while opening the buckle. Do not force the aluminium profile to fit into the buckle. These actions
will damage the plastic buckle.
3.
Peel.off.the.protective.films.from.the.surfaces.of.the.aluminium.stabilizer.(Box.3-f).
4.
Peel.off.the.protective.film.on.the.pads.for.the.stabilizer.(Box.3-h-IV).and.stick.them.at.the.bottom.corners.of.the.stabilizer..
Step 4.
5.
Cut.the.magic.tape.with.adhesive.tape.at.the.back.(Box.3.-.h.-.III).into.four.pieces.and.stick.them.on.the.top.corners.of.the.stabilizer.
(b)
(a)
Step 5.
(a) Front
(b) Top
P. 19
Advertisement
Table of Contents
