Table of Contents
Advertisement
Assembly of the body and landing gear
1.
Cover.the.bottom.body.frame.with.the.top.body.frame.(Box.3-a);.you.may.need.to.gently.bend.the.bottom.body.frame.to.mount.the.hooks.
of the top body frame on the bottom body frame.
2.
Fasten.the.frames.with.four.screws.for.the.body.frame.(ø2.6.x.10.mm,.black).(Box.3-e).
3.
Place.the.RC.EYE.650.upside.down.on.a.stable.platform.
4.
Drill.bores.on.the.chassis.(Box.3-d).for.mounting.the.plastic.landing.gear..Before.drilling,.mark.the.position.of.the.bores.with.the.landing.
gear..If.you.are.using.the.camera.mounting.bracket.and.the.slider.plate,.also.drill.bores.on.the.chassis.
5.
Cover the bottom body frame with the chassis.
6.
Mount.the.plastic.landing.gears.at.the.chassis.with.the.screws.for.the.chassis.(ø2.8.x.15.mm,.black).(Box.4-g)..Overlap.the.landing.gears.
with each others in the middle.
P. 16
Advertisement
Table of Contents
