Table of Contents
Advertisement
Assembly of the propellers
1.
Before.assembling.the.propellers,.identify.the.front.of.the.RC.EYE.650..The.antenna.hole.is.on.the.left.side.and.the.red.magic.tape.is.on.
the front.
2.
Identify.the.rotating.direction.of.the.propellers..The.clockwise.propellers.(Box.2-c).must.be.placed.at.the.front.and.the.back.of.the.RC.
EYE.650...The.clockwise.propellers.are.marked.with.the.word."RIGHT".while.the.anti-clockwise.propellers.(Box.2-d).are.marked.with.the.
word."LEFT"
If the propellers are not installed as described, the programmed rotating directions will no longer be in line with the
rotating directions of the propellers. The RC EYE 650 is therefore no longer able to fly and can no longer be operated!
Loss of guarantee/warranty!
3.
Identify.the.orientation.of.the.propellers;.there.is.a.hexagonal.hole.at.the.bottom.of.the.propeller.
4.
Put.a.propeller.on.the.motor;.fit.the.hexagonal.bolt.into.the.axis.of.the.motor.
5.
Put.a.wave.washer.(Box.2-b-II).on.top.of.the.propeller;.fasten.it.with.a.spinner.(Box.2-b).
P. 23
Advertisement
Table of Contents
