Table of Contents
Advertisement
4.
Identify.the.front.of.the.RC.EYE.650..
5.
Connect.the.respective.motor.wires.from.the.aluminium.profile.to.the.motor.driver.boards.QC1.42.(Box.1-b)..When.you.are.looking.from.
above, connect the wires from the motors (with the male bullet connector) to the closest female bullet connector from the motor driver
boards.QC1.42.(Box.1-b).in.an.anti-clockwise.direction..The.wires.are.of.three.colours,.connect.the.wires.of.the.same.colour.
Do not lay the wires around the combined flight control board (QC-09 & QC-07). if necessary, fasten them tightly on the
body frame with cable ties. loosen wires may cause malfunction of the gyro.
P. 15
Advertisement
Table of Contents
