Table of Contents
Advertisement
NOTE: If someone helped install the wireless network in your home or office,
it may be helpful to consult with them as you set up your CapTel phone.
1. The display asks, Press
YES for WiFi Setup.
Press the YES button.
2. Your CapTel checks if any
wireless networks have been
used previously and are already
saved in memory. If no previous
networks are detected, CapTel
scans for available networks in
your location.
3. CapTel lists any WiFi networks
detected, in order of the
strongest signal strength to the
weakest signal strength.
Use the UP/DOWN arrows to
highlight the wireless network
you want to use. Press the YES
button to select.
NOTE: CapTel may detect wireless networks
in your location that you do not recognize –
such as a wireless network from a neighbor or
nearby office. Be sure to select the SSID that
matches your WiFi network.
If you do not see the network you want listed, try moving your CapTel phone
to an area closer to your wireless router and selecting Refresh Network List.
CapTel will re-scan for available networks. See "Troubleshooting – Problem
with WiFi Network" on page 28 for additional directions.
Installation Help: 888-269-7477
Please plug in Ethernet Cable.
Or
Press YES for WiFi Setup
Scanning for WiFi Networks
SSID
2WIRE269
OfficeNet
ACBRDBAND
NETWORK1
Refresh Network List
Enter Network Manually
CONNECT TO YOUR INTERNET SERVICE
SETUP - CONNECT TO INTERNET
Press YES for WiFi Setup
SETUP - WIFI
Press YES to accept or NO to exit
Security
Ch.
WPA
08
WPA
06
WPA
06
WPA
04
Press YES to Select a Wireless Network
Press NO To Refresh Network List
Signal
•
15
Advertisement
Table of Contents
