Step 7 Setting The Time And Date - Ultratec CapTel 880i Setup Manual

STEP 7
To Set the Time and Date
1. CapTel shows you the current
time and date setting. Use the
UP/DOWN buttons to move the
blue highlight over the number
that you want to change.
2. On the dialing pad, press the key that
lists the number you want to use.
Example: To set the time for 11:30, press the "1" key twice, then press the
"3" key followed by the "0" key.
Note: When you enter the date setting, only the last two numbers in the year
can be changed.
3. When you have set the time and date, press the YES key to save.
TIP: To change the time from AM to PM, make sure the AM/PM section is
highlighted, then press the 2 key for "AM" and the 7 key for "PM".
Installation Help: 888-269-7477
Setting the
Time and Date
SET THE TIME AND DATE
12:13 AM
01/01/2015
Use 2 for AM
Use 7 for PM
Use the keypad to enter the Time and Date
Press YES to accept or NO to exit
SETTING THE TIME AND DATE • 19