Basic Settings For Faxing (For E-Studio403S Only); Setting For Country Code - Toshiba e-Studio332s Operator's Manual

Basic Settings for Faxing (for e-STUDIO403S only)

Basic Settings for Faxing (for e-STUDIO403S only)
This section explains basic settings for faxing. Be sure to configure the following settings before you transmit faxes.

Setting for Country Code

Note
Please select the correct country code.
If [Country Code] is set to the wrong value, there is a possibility
that fax transmission and reception may not function correctly.
Though the line connection is correctly, if the fax transmission or
reception fails, ensure the [Country Code] setting first.
Hold down the power switch for about a
1
second to turn on the power.
Press the <SETTING> key on the operator panel.
2
Press the to select [Admin Setup]
3
and then press
Enter the administrator password.
4
The default password is "aaaaaa".
Press , ,
a
character you want, and then press
- The selected character is entered as "*"
in the text filed.
- If you have entered an incorrect value,
press the <CLEAR> key and then
enter the correct value.
.
OK
, to select the
Repeat step a until all characters
b
required are entered.
Press the
c
press
Press the
5
then press
Press the
6
then press
Press the
7
and then press
Press the
8
name and then press
If your country name is not displayed, select
the following value.
- If your country is Czech Republic or
Slovakia, select [Czech/Slovakia].
- If your country is Canada, select [U.S.A].
- If the region of your country is Latin
America, select [Latin America].
- If the region of your country is Europe or
Middle East, select [International].
Settable Country Code:
U.S.A. International United Kingdom Ireland
Norway
Germany Hungary Czech/Slovakia Poland
Switzerland Austria Belgium Netherlands
France Portugal Spain Italy Greece Australia
New Zealand Singapore Hong Kong Latin
.
OK
America Mexico China Russia Taiwan Japan
Korea Thailand Malaysia Jordan Argentina
Brazil South Africa Belarus Moldova Turkey
Ukraine
If the confirmation message is displayed
9
then press
The machine will re-start automatically
and the default screen will be displayed a
few minutes later.
Hold down the power switch for about a
10
second to turn off the power.
Memo
If the Country Code is changed, the values of [PBX Line]
and [MF (Tone)/DP (Pulse)] are changed to the default
values for each Country Code.
- 44 -
and to select [Enter] and
.
OK
to select [Fax Setup] and
.
OK
to select [Fax Setting] and
.
OK
to select [Country Code]
.
OK
or to select your country
.
OK
Sweden Finland Denmark
.
OK