Toshiba e-Studio332s Operator's Manual page 58

Table of Contents

Advertisement

Connecting to a Computer
Note
If [TOSHIBA e-STUDIO403S(PS)] or [TOSHIBA
e-STUDIO403S(PCL)] is not correctly displayed in
[Kind], click [-] to remove your machine from [Print
& Fax] and then Redo the procedure from step 8 to
12.
Close [Print & Scan] (For Mac OS X
14
10.5 and 10.6:[Print & Fax]).
Remove "Software DVD-ROM" from the
15
computer.
The installation is complete.
Using Bonjour (for Mac OS X 10.4.0
to 10.4.11)
Install the driver in the computer and set the
machine as a network printer.
Memo
The following procedure uses Mac OS X 10.4.11 as an
example. Depending on an OS, the description may be
different.
Install the driver in the computer.
Ensure that your machine and the
1
computer are turned on and connected.
Reference
"Connecting an Ethernet Cable" P. 51
From the Apple menu, select [System
2
Preferences].
Select [Network].
3
Select [Network Port Configurations]
4
from [Show], and then check that
[Built-in Ethernet] is selected.
Close [Network].
5
Insert "Software DVD-ROM" into the
6
computer.
Double-click the [TOSHIBA] icon on the
7
desktop.
Double-click [Driver] folder > [PS] or
8
[PCL] folder [Installer for Mac OSX].
Enter the administrator password, and
9
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
From the [Go] menu, select [Utilities]
10
and then double-click [Printer Setup
Utility].
Note
If [Printer Setup Utility] is already running, close it
and open it again.
Click [Add].
11
If the [You have no printers available] dialog
box appears, click [Add].
Select the name of your machine whose
12
[Connection] is [Bonjour], and then
check that [TOSHIBA
e-STUDIO403S(PS)] or [TOSHIBA
e-STUDIO403S(PCL)] is displayed in
[Print Using].
The name of your machine is displayed with the
format of "TOSHIBA e-STUDIO403S- (the last six
digits of the MAC address)".
Click [Add].
13
If the [Installable Options] window is
14
displayed, click [Continue].
If you have installed the optional second tray unit
before the driver installation, configure each item
and then click [Continue].
- 58 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio403s

Table of Contents