Table of Contents
Advertisement
Align both guide posts of the image drum with
their guide grooves on the printer, and gently
set the image drum into the printer.
Guide Post
Guide Grooves
Remove the toner cover (orange) from the
image drum set in the printer by pushing the
projection in the direction of the arrow.
Protrusion
Memo
Dispose of the toner cover as incombustible matter.
Note
Some toner may remain on the reverse of the toner cover.
Take care as it may stain other parts when removed.
The image drum (the green cylinder) is very delicate.
Handle it with extreme care.
Do not expose the image drum to direct sunlight or bright
interior light (approximately 1,500 lux or more). When
leaving it under normal interior light for 5 minutes or
more, cover it with black paper.
Do not leave the image drum for more than 1 hour, even if
it is covered with black paper.
Install a new toner cartridge.
3
For details, see
"Procedure for Replacement"
(P.
165).
Close the top cover.
4
Guide Post
Toner cover
- 167 -
Replacing Consumable Items
8
Advertisement
Table of Contents
