Toshiba e-Studio332s Operator's Manual page 52

Connecting to a Computer
Enter the administrator password.
4
The factory default password is "aaaaaa".
Select [Complete], and press
5
Press the and [Network Setting],
6
and then press the
If setting the IP address manually, check
7
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the and select [Auto], and press
to step 12.
Enter the IP address and press
8
To move to the next box, press the
Enter the subnet mask and press
9
To move to the next box, press the
Enter the default gateway address and
10
press .
OK
To move to the next box, press the
Enter the DNS server and WINS server if
11
needed.
If it is not necessary to connect the DNS server or
WINS server to the network, press
pop-up message showing the setting completion is
displayed.
When the setup menu screen is
12
displayed, press
setup.
.
OK
.
. Proceed
OK
.
OK
.
.
OK
.
.
until the
OK
to complete the
Next, install the printer and fax driver into the
computer.
Note
To complete this procedure, you must be logged in as an
administrator.
Ensure that your machine and the
1
computer are turned on and connected,
and then insert the "Software DVD-ROM"
into the computer.
Click [Run Setup.exe] after [AutoPlay]
2
is displayed.
If the [User Account Control] dialog box
appears, click [Yes].
.
OK
Select the language and then click [Next].
3
Select the device of your machine, and
4
then click [Next].
Read the license agreement and then
5
click [I Agree].
Read the "Environmental advice for Users"
6
and click [Next].
- 52 -