Figure 57. Create Salto Router - Chamberlain IPAC Administrator's Manual

IPAC Server Administrator's Manual
To create a Salto Door Lock:
1. Scroll over the Configuration link. The sub-navigation menu displays.
2. From the sub-navigation menu, click Devices from the dropdown list. The Device
List page displays.
3. Click Create New Device.
4. From the dropdown menu, select Salto Door Lock and click Next.
5. Select the Owner from the dropdown list.
6. Select the Salto Router and Lock ID from the dropdown lists.
7. Select an Unlock Schedule if any for the Salto Door Lock.
8. Select the Passthrough Period for the Salto Door Lock. The default is 10
seconds.
9. If you wish to control the Salto Door Lock from your browser, check the Control
From Browser checkbox.
10. If you wish to enable alarm console settings, check the "Combine Alarms"
checkbox. You may also provide instruction text, set alarm priority, schedule
when the alarm will function, and whether or not the alarms will function during
certain threat levels.
11. You may have the Salto Door Lock ignore Threat Levels or select under what
Threat Level conditions the will operate.
12. You may select which groups have Access Permissions to the Salto Door Lock
and under which schedules these permissions will operate.
98
Create Salto Router
Figure 57.
Page 98 of 334