Table of Contents
Advertisement
IPAC Server Administrator's Manual
Special Options for Devices: Muster Points
The Muster Point feature allows administrators to use the normal antipassback functionality
to track the presence of users in a facility. Antipassback zones are also used for mustering
with the addition of a new muster point device type that is a dedicated way to move users
into a different zone for tracking purposes.
Muster point devices are a device type that only requires a reader input and a zone
configuration. Users that present a credential at a reader are moved into the zone. No
permissions or other setup are required, as the mustering point does not actually control
access to any resources. It accepts all credentials tied to a user as valid and shows up in the
activity log as a valid read access. As with other IPAC Server™ antipassback functionality,
panel boundaries have no effect on this feature.
To create a muster point:
1. Scroll over the Configuration link. The sub-navigation menu displays.
2. From the Devices link, click Devices from the dropdown list. The Device List
page displays.
3. Click Create New Device.
4. From the device type dropdown list, select Muster Point. Click Next.
NOTE :
Antipassback zones need to be pre-established before Muster Points
can be functional.
5. Enter the name of the muster point.
6. Choose the owner of the muster point from the dropdown list.
7. Choose the control panel from the dropdown list.
8. Choose the Input and Muster Zone from the dropdown list.
9. You may have the muster point ignore Threat Levels or select under what Threat
Level conditions the muster point will operate.
10. If you wish to apply any Keypad Commands to the Muster Point, click on the
icon and select the Keypad Command from the popup window.
11. Click Save. You are returned to the Device Details page.
90
Page 90 of 334
Advertisement
Table of Contents
