Table of Contents
Advertisement
IPAC Server Administrator's Manual
NOTE: Clearing Alarms
Clearing an alarm removes an alarm event that is still not in its normal
state off of the alarm console. For example, normally a door ajar alarm
stays on the console until it is both acknowledged and the door is
closed again. If you want to remove the alarm event before actually
closing the door, you can acknowledge the alarm event, then bring up
the Alarm Details popup window again and press the Clear Alarm
button, which will forcibly remove the alarm event from the alarm
console.
Enabling Alarm Events for Doors, Valid Credential Devices, and Elevators
An administrator with appropriate permissions can enable alarm events for doors, valid
credential devices, and elevators by defining the privileges on the Edit Device page. This
allows failed access events to appear as alarms, as well as allowing the combination of
multiple alarm events of the same type into a single reported alarm event.
35
Alarm Update/Acknowledgement
Figure 19.
Figure 20.
Alarm Clear
Page 35 of 334
Advertisement
Table of Contents
