Upgrading Your Firmware; Figure 153. Upgrade System Firmware - Chamberlain IPAC Administrator's Manual

IPAC Server Administrator's Manual

Upgrading Your Firmware

On occasion, Brivo LLC will issue an upgrade of the IPAC Server™ firmware. When this
occurs, you will need to contact Brivo Technical Support with the unit serial number for your
IPAC Server™ to verify your support contract and request the firmware upgrade.
This operation is restricted to administrators with appropriate permissions.
WARNING: Database Backups and Firmware Upgrades
When performing a backup for the IPAC Server™ prior to upgrading
firmware, it is important to allow the backup process to complete
entirely before proceeding with firmware upgrades. This ensures the
integrity of the backup process and prevents any interruptions that
may cause future problems.
WARNING: Firmware Upgrades and Maintenance Mode
When upgrading the firmware of the IPAC Server™, the appliance will
automatically enter maintenance mode.
To upgrade the application firmware:
1. Scroll over the System link. The sub-navigation menu displays.
2. From the sub-navigation menu, click Settings. The Settings sub-navigation
menu displays.
3. From the Settings sub-navigation menu, click Upgrade Firmware. The Upgrade
Firmware page displays.
4. If you want the backup file of your current database to be unencrypted, click the
Generate an unencrypted backup file checkbox.
267
Upgrade System Firmware
Figure 153.
Page 267 of 334