Chamberlain IPAC Administrator's Manual page 130

IPAC Server Administrator's Manual
6. Owner is also a required field for all device types and identifies the account
responsible for the device. The default value in the drop-down list is the current
account.
7. Device Profile is an optional field that allows a predefined device profile to be
used instead of setting up the device manually.
8. The Door Node field displays only when you are configuring a Door. Although
this page does not require you to select a control board/point combination from
the drop-down list, the door will not function until you do. The list includes all
valid, available door nodes.
9. The Input drop-down list displays only when you are configuring either an Input
Switch or Valid Credential Input Device, and includes all valid, available input
terminals.
10. The Input Device and Event dropdown lists are valid for Event Trigger devices
only. The Input Device list includes all doors associated with this account, while
the Event list lets you identify a specific access event, such as
Open
that will cause the selected output behavior to occur.
11. The Target Output dropdown lists are valid for all device types. Relay will apply
the selected Output Behavior, Schedule will apply the selected Output Behavior
to the Target Schedule, and Threat Level sets the Target Threat Level.
12. The Output Behavior varies dependent upon which device type or target output
is selected and include: Pulse, Follow, Latch, Unlatch, Toggle, Activate,
Deactivate, and Set Threat Level.
13. Output Behavior is a valid field for all device types other than Door. From the
drop-down list, select the behavior you want to occur in response to the
identified input. See the Glossary at the end of this document for a brief
description of each output behavior type.
14. When an output behavior of either Pulse or Follow is selected, the second(s)
delay field becomes active. Enter the amount of time, in seconds, that should
elapse between when the input is deactivated and the output released (for
Follow) or the total amount of time the output should be engaged for each time
the input goes to an activated state (for Pulse.)
15. The Unlock Schedule dropdown list displays only when you are configuring a
Door, and is used to indicate the schedule period during which the door should
be left unlocked.
16. The Output field displays when you are configuring an Input Switch, Valid
Credential Input, or Event Trigger device. Click the
relay for any of these devices.
17. Under the Relay column, click on the (Click to select panel) area and the control
panel list popup will appear. Select the appropriate control panel and then
select which relay from the dropdown list.
18. The Active Schedule dropdown list displays when you are configuring any device
other than a Door, and is used to indicate the schedule periods during which the
device should operate.
129
Page 129 of 334
Door Forced
icon to choose the Output