Chamberlain IPAC Administrator's Manual page 133

IPAC Server Administrator's Manual
22. For Doors, Valid Credential Devices, Input Switches, Schedule Controlled
Devices, and Event Triggers, you can select a schedule during which
presentation of a card is required.
NOTE:
If both Two-Factor and Card Required are selected, Two-Factor

Credential Schedule takes precedence over Card Required and so a
user will be required to present both a security card and a valid PIN to
gain access.
23. When the Control from browser option is checked, system devices configured
with an output behavior of Pulse, Latch or Unlatch will be monitored and
controllable from the Dashboard page.
NOTE:

This control mechanism does not apply to devices for which the Follow
output behavior has been defined.
24. When the Include failed access as alarm option is checked, system devices will
be monitored from the Dashboard page. Instruction text, alarm priority, active
scheduling, and threat level compliance may also be defined.
25. When the Enable option is checked, the Antipassback Settings are active,
allowing for soft reset (if checked) after a number of minutes (1-99999).
Primary and Alternate Zones may also be defined.
26. You may have the device ignore Threat Levels or select under what Threat Level
conditions (including requiring two-factor authentication) the device will operate.
27. The Access Permissions section of the page displays only when a Door or Valid
Credential Input device is being configured, and lists all user groups currently
132
Check the Report Engage box to indicate that
!
engagement of this device should be reported in the
Activity Log. The default is checked.
If Report Engage is checked, enter a Message to be
!
used in the Activity Log, such as "Motion detected."
Check the Report Disengage box to indicate that
!
disengagement of this device should be reported in the
Activity Log. The default is checked. This field is not
valid for Event Trigger devices.
If Report Disengage is checked, enter a Message to be
!
used in the Activity Log, such as "Motion subsided."
This field is not valid for Event Trigger devices.
On the Card Required Schedule dropdown list, click the
!
schedule during which you want this door to require
the presentation of a card credentials. During the
selected time period, users with privileges at this door
will need scan a security card.
Page 132 of 334