Table of Contents
Advertisement
IPAC Server Administrator's Manual
Setting System Date and Time
The system normally synchronizes its system clock via NTP (Network Time Protocol) with
servers over the Internet, to ensure accuracy. In case the system cannot reach an external
server for time synchronization, such as when a firewall blocks access or the system is
simply not on a network with Internet access, the system time must be set manually.
To set the date and time for your system:
1. Scroll over the System link. The sub-navigation menu displays.
2. From the sub-navigation menu, click Settings. The Settings sub-navigation
menu displays.
3. From the Settings sub-navigation menu, click System Date/Time. The System
Date/Time page displays.
4. Select a System Time Zone from the Time Zone drop-down list on the bottom
half of the page, and then click the corresponding Set button.
5. To manually set the System Time, enter the current time using the Set Time
fields, and then click the corresponding Set button.
6. The Network Time Protocol defaults to
automatically synchronize with a different Internet time server enter the
associated NTP Server Address, and then click the corresponding Set button.
264
Set System Date and Time
Figure 151.
time.nist.gov
. To set the system to
Page 264 of 334
Advertisement
Table of Contents
