Table of Contents
Advertisement
IPAC Server Administrator's Manual
Live Status
When logging into the Brivo interface, the Dashboard link displays the live status of a door
or device on the right-hand side. For example, depending on its position, the status of a
door will be displayed on the Dashboard under "Device Status" as "open" or "closed."
Under the "Device Status" heading, messages display in various colors the status of the
device. You may choose to customize the message displayed for programmable devices. You
can also select the color for the message you wish to display.
Programmable Devices
You can customize the live status message of the following devices:
Switch Input Devices
!
Event Triggered Devices
!
Valid Credential Input Devices
!
Schedule Controlled Device
!
To customize Live Status message
1. Scroll over the Configuration link at the top of any page. The sub-navigation
menu displays.
2. From the Devices link, click Devices. The Device List page displays.
3. If you want to modify an existing device's message
4. Click on the device whose message you wish to modify.
5. At the bottom of the page, click Edit.
6. Under the "Live Status" heading, check the box "Control from browser." The
"Engage Message" and "Disengage Message" fields will become active.
7. Enter the message you wish to be displayed on the Dashboard in the respective
fields.
8. Click Save.
Color Coding the Status of a Programmable Device
You may also choose to select specific colors to indicate the status of a Programmable
Device, such as a Switch Input Device, an Event Triggered Device, a Valid Credential Input
Device, or a Schedule Controlled Device. This decreases the time it takes for you to search
for a particular event on the Live Status page.
125
Customize Live Status Message
Figure 73.
Page 125 of 334
Advertisement
Table of Contents
