Chamberlain IPAC Administrator's Manual page 71

IPAC Server Administrator's Manual
5. If this is a Group Enabled Schedule, select the Enabling Group from the drop-
down list and enter an associated Grace Period. Please refer to the section on
Creating a Group Enabled Schedule before assigning an activating group to any
schedule. To turn off the auto-deactivate feature of group enabled schedules,
uncheck the Auto Deactivate checkbox. Once this is done, this then treats the
group enabled schedule like a normal schedule without requiring any further
input from the enabling group until the device is deactivated manually.
WARNING: Turning off the Auto-Deactivate feature
All panels attached to the IPAC Server™ appliance must have
firmware 3.0.5 or later to be able to turn off the Auto-Deactivate
functionality.
WARNING: Group Enabled Schedules
Group Enabled Schedules support the IPAC Server™ First-
Person-In and Supervisor-on-Site functionality. If you assign an
enabling activating group to a schedule without first
understanding how this feature works you may inadvertently
create a security risk. Refer to the section on Creating a Group
Enabled Schedule before assigning an activating group to any
schedule.
6. For each day of the week, use the schedule graph to define a block of time
during which the schedule is active. Active blocks determine when a group of
users has access to a door or device or when a device is operational.
70
To define an active block, click on a gray column for any day
•
(i.e., Mon). Click at the desired start point (e.g.., 8:00 AM) and
drag the cursor down to the desired end point (e.g., 5:59 PM),
and then release. Two things happen. First, this block of time is
added to the Block drop-down list as a menu option (e.g., as
Mon 8:00 am – 5:59 pm). Second, whenever the block is
highlighted in the schedule graph, the start and end times
display in the Start and End fields.
To edit a block of time once it is defined, click the block name on
•
the Block drop-down list or click the highlighted block on the
schedule graph, and then use the Start and End fields to change
the time range.
To delete an access block, click inside the block to highlight it
•
then click Delete Block. The block is cleared from the schedule
graph, the associated menu option is removed from the Block
drop-down list, and the Start and End fields become inactive.
To repeat an access period for the work week, fill in the Monday
•
column, and then click Copy Mon -> Mon-Fri.
To clear all active blocks, click Clear.
•
To revert to the most recently saved settings, click Revert.
•
Page 70 of 334