IPAC Server Administrator's Manual
IPAC Server™ with multiple IPAC SYSTEM panels on multiple LANs
The following network requirements are applicable to a system in which an IPAC Server™
appliance is managing one or more IPAC SYSTEM control panels on multiple LANs (i.e.,
typically multiple sites, each with their own connection to the Internet or a corporate WAN)
as shown in the figure below.
IPAC
Figure 4.
The following requirements for a multi-site IPAC Server™ network are in addition to the
requirements for a single LAN.
Requirements
Site-to-site (LAN-to-LAN) connectivity
IP routing
19
IPDC
IPAC Server™ with Multiple Panels on Multiple LANs
require the end user to be aware of
proxy settings for proper behavior of
his/her browser. Consult your local
network administrator for further
information about proxy settings.
Comment
The sites where the IPAC Server™
and IPAC SYSTEM equipment is
located must all be able to connect to
a common networking environment
such as the Internet or a corporate
WAN
There must be an IP route
established between the sites where
the OnSite equipment is located.
Page 19 of 334
IPDC
IPAC