Figure 33. View Active Account - Chamberlain IPAC Administrator's Manual

IPAC Server Administrator's Manual
6. In the Address field enter the complete address for the person identified as the
main contact. The format of this address will vary depending on the country in
which the account is located. For example, in the United States the address
should include the street number and name, office number, city, state, and zip
code.
7. In the Phone field enter the complete phone number for the person identified as
the main contact. As with the address, the format of the phone number will
depend on the country. In the United States, this field would contain a three-
digit area code, a seven-digit number, and possibly an extension.
8. In the Email field enter the email address for the main contact.
9. Enable Threat Level functionality for the account. Check the "Enable Threat
Levels" to be able to use threat levels on the tenant account.
10. Enable Alarm Console Settings functionality for the account. Check the "Enable"
checkbox to set scheduling, priority, and threat level functionality.
11. In the Password Complexity Rules section, enter the required minimum
password length, and whether or not the password will require non-
alphanumeric, upper-case and lower-case, and/or numeric characters.
12. Click Save. At the top of the page, the active account displays. To change the
active account, click on the Active Account link and select the new Active
Account from the list.
NOTE:

You now have a multi-account setup. See Tenant Accounts for
guidelines on managing these accounts.
51
View Active Account
Figure 33.
Page 51 of 334