Eclipse TD508MK3 Owner's Manual page 16

5

Stand the speaker upright.
6

Remove the base cover.
7

Remove the safety cable from the speaker base.
Tip
Remember to retain the screw as it will be used later.
8

Lift up the speaker to remove it from the speaker arm.
Caution
･ The speaker is heavy, so hold it firmly while removing
it from the speaker arm.
･ After removing the speaker, place it on a surface that
will not mark it or allow it to roll around.
❶
Speaker
Speaker base cover
Screwdriver
Safety cable
❶
Speaker
− 2 −
Speaker base
Screw
Speaker arm