Manual Transaxle Oil (If So Equipped); Continuously Variable Transmission (Cvt) Fluid - Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual

Manual transaxle oil (if so equipped)

2. Turn the upper cover over. Squeeze the
head of the moulding clip (C) with pliers
and remove the moulding.
9
3. Install the upper cover, and then attach the
moulding (D).
NOTE
 Attach the moulding with the wide part
toward the front of the vehicle.
9-10 Vehicle care and maintenance
4. Install the clips (E).
Manual transaxle oil
equipped)
Whenever the manual transaxle oil level is
checked, add oil to maintain the proper level,
if necessary.
Refill or change the oil according to the table.
Oil type
Mitsubishi Motors Gen-
uine NEW MULTI
Lubricant
GEAR OIL API Classi-
fication GL-3
Viscosity range SAE 75W-80
I n f o r ma t i o n P r o v i d e d b y :
Continuously variable
transmission (CVT) fluid
so equipped)
The continuously
(CVT) should be maintained and serviced by
an authorized Mitsubishi Motors dealer or a
repair facility of your choice to obtain the
best performance and longest life. It is impor-
tant that the transmission fluid is kept at the
correct level.
(if so
Fluid type
N00938200178
Use only "Mitsubishi Motors Genuine
CVTF-J4" transmission fluid to ensure opti-
mum transmission performance.
CAUTION
 Using the improper transmission fluid may
damage the transaxle.
Special additives
Do not use any fluid additives to the trans-
mission.
(if
N00938101099
variable transmission